Ultrasonic Cleaning Systems

ULTRASONIC DENTAL INSTRUMENT CLEANERS

Ultrasonic cleaning is used in clinics and dentist practices to remove organic remains, such as blood and saliva, from the instruments and devices before being sterilised. It is also very efficient with inorganic remains, such as dental cement and dental-grade plaster used in the preparation of moulds.

Dentists also recommend it being used with dentures at home for it being so easy to use compared to products that require soaking and manually scrubbing the dentures.

ELECTRONIC CLEANING MACHINE

Are you looking for an electronic cleaning machine? Ultrasounds are very
efficient in treating electronic components such as
resistances, condensers, transistors, reels, diodes, fuses, etc.

Given the cleaning precision and the small size, this is the most efficient solution, saving time and cleaning the entire circuit, reaching even the smallest parts.

ULTRASONIC JEWELLERY CLEANER

Ultrasonic jewellery cleaner for a swift, careful and in-depth cleaning of necklaces, brooches, watches, coins and other valuable parts.

Ultrasounds get to the most hard-to-reach areas where cloths, brushes or other conventional cleaning means simply cannot. They are used both in the manufacturing process and in the use and subsequent fixing of the jewellery.

OPTICAL ULTRASONIC CLEANER

Our optical ultrasonic cleaner is perfect to clean instruments in opticians and laboratories, because it thoroughly cleans glasses and removes accumulated dirt and traces of grease coming from the skin, which accumulate on the lenses and frames.

Given the precision and size of these parts and their delicate nature, ultrasonic cleaning is very efficient compared to manual cleaning with cloths or towels. They are used both in the manufacturing process and in the use and subsequent fixing of glasses.

MEDICAL CLEANING MACHINES

Medical cleaning machines for in-depth cleaning of surgical and medical instruments used in surgery, ophthalmology and veterinary uses. It removes organic or inorganic traces from the instruments as a prior step to a subsequent efficient disinfection and sterilisation.

The result is much better than manual cleaning, even with gloves, because it increases exposure of the instruments to the fluids. It also reduces the possibility of injuries with contaminated sharp items.

Ultrasonic Cleaning System for Automotive Industry

The efficiency of TierraTech® ultrasonic cleaner for automotive parts is outstanding. Oils, grease and cinders are removed quickly and efficiently.

The MOTOR CLEAN range is specially designed to clean all types of components related to engines: blocks, cylinder heads, turbochargers, injectors, coolers, filters, brakes, gearboxes, etc.

This equipment covers the needs of: vehicle repair shops, truck repair shops, naval engine repairs and cogeneration, aeronautical industry, grinding repair shops and engine rebuilding works.

 ULTRASONIC MOTOR CLEANING

The daily cleaning of all kinds of parts in general repair shops becomes a complex task if you do not have the adequate cleaning means.

Ultrasonic cleaning for automotive is ideal to remove different types of dirt (grease, cinders, oils, etc.) in parts such as cylinder heads, pumps, particle filters, etc., both on the surface and areas that are hard to reach, reducing the effort and time employed by traditional systems.

In one square metre and with an energetic cost and a minimum amount of detergents, we achieve a complete washing room, releasing the operator from cleaning tasks.

ULTRASONIC CLEANING OF INJECTORS

In diesel injection workshops, cleanliness plays a significant role both in the quality of the final result and in the productivity.

Ultrasonic cleaning for diesel engines is ideal for these laboratories because it enables cleaning the pumps in less than 10-15 minutes without having to dismantle them.

Once dismantled, it only takes another 10 minutes to be completely sure have that all the internal conduits are perfectly clean, thus avoiding the typical problem that arises when a repair is carried out without adequate cleaning.

ULTRASONIC GRINDING

Regardless of the grinding to be carried out or the part to be treated, our engine block cleaning equipment with ultrasonic ensures a flawless finish and precision in the grinding industry.

It removes cinders, oils and grease efficiently, as well as the usual residue we find in cylinder heads and blocks.

The use of ultrasonic cleaning considerably reduces the time employed in cleaning, obtaining the highest quality and avoiding the use of acids, brushes and grit blasting, simplifying the cleaning process and removing the bottlenecks all rectifiers have in this part of the process.

TURBO CLEANER MACHINE

Our ultrasonic turbo cleaner machine is the fastest and most efficient solution for turbocharger re-constructors because it removes cinders and burnt oils regardless of the complexity of the turbocharger structure.

It also allows cleaning many turbochargers in the same process, which improves quality and production times compared to traditional processes.

INDUSTRIAL GEARBOX CLEANER

In these repair shops, cleaning the parts of the transmission system is a daily necessity that requires a fast and efficient system.

The Motor Clean line covers this requirement regardless of the complexity of the piece or the amount of parts to be cleaned, removing grease, oils, metallic shavings, etc. fast and efficiently without the hard-to-access parts becoming a challenge.

For industrial gearbox cleaner, trust Tierratech.

HEAVY MACHINERY MAINTENANCE

The harsh working conditions to which this type of machinery is subjected to make preventive maintenance a fundamental task to lengthen their useful life and smooth operation.

The Motor Clean ultrasonic cleaning equipment contributes to the maintenance of industrial machinery, facilitate cleaning radiators cylinder heads, engine blocks, transmissions, hydraulic systems and working tools, such as shovels or chains, thereby contributing towards a correct maintenance that favours the efficient work of heavy machinery and decreases the possibility of unexpected breakdowns.

Industrial ultrasonic cleaner

TierraTech® develops industrial ultrasonic cleaner tailor-made to any requirement, regardless of the sector or its intended use.

We design and manufacture standard or special equipment and we cover all requirements, according to the industrial sector or the piece to be cleaned. Below you will find information on the main uses where we provide solutions within the extensive industrial sector.

AIRCRAFT PARTS CLEANING

The precision of ultrasound cleaning helps both the manufacturers of the components and MRO centres to satisfy the high-quality requirements and the strict safety standards of the sector.

In a sector where safety is crucial, the equipment offered by TierraTech® is essential to clean of hydraulic systems, heat interchangers, engine pieces, injection pumps, vanes, etc. since it does not damage the materials or modify the dimensions or geometry of the surfaces.

TierraTech® has extensive experience in the aeronautic industry and can offer you the most suitable solution to your requirements.

GRAPHIC INDUSTRY MAINTENANCE

Ultrasound cleaning systems are used to clean rollers and anilox sleeves, etching plates, cartridge holders, ceramic rollers and other removable printing pieces that accumulate oil, water, alcohol or UV-based ink.

The accumulation of dirt causes a progressive deterioration of the drum, which affects the printing quality. The advantages of ultrasound cleaning are the recovery of the transference level of the cells from the anilox rollers (recovery of the cell volume) and also, rotogravure cylinders in all sizes. Ensure a high printing quality by using our machines for your cleaning needs.

Tierratech with the graphic industry maintenance.

ULTRASONIC MOLD CLEANING

Immersion washing in our ultrasound tanks is an efficient and high-quality solution to clean all kinds of plastic, rubber, rubber/metal, aluminium injection and zamak injection moulds because they optimise production times.

They also enable cleaning the mould in full without having to dismantle the piece and damaging the parts. This is why this represents the most efficient alternative as opposed to traditional cleaning systems.

We design and manufacture multistage cleaning equipment adjusted to the amount of moulds to be cleaned and the particular needs of the production process to best suit each customer.

ELECTROPLATING SURFACE TREATMENT

Ultrasound cleaning before coating the pieces entails saving quite a lot of time and labour. Electroplating surface treatment with ultrasouunds replaces replaces manual cleaning and the long immersion times required by the traditional cleaning methods.

It removes polishing pastes, grease and dirt swift and efficiently from any kinds of metal and plastic pieces, reaching any hidden areas. This means a better adherence to the surface of an electrolytic coating and, therefore, an enhanced appearance and quality of the product.

ULTRASONIC PAINT STRIPPING

Do you want to improve the ultrasonic paint stripping process? In the field of stripping, the use of ultrasounds enables accelerating processes and eliminating all the organic coating from any metallic surfaces. This is why we use the latest generation of strippers.

Strippers combined with the mechanic action of the ultrasounds enables removing paint or coating in full. TierraTech® has ample experience in industrialised stripping processes for steel, aluminium, etc.

We have considerable experience in recovering valuable parts, for example, alloy wheels, automotive components and aluminium profiles for architectural purposes, etc. and in maintaining instruments used in painting lines.

ENERGY INDUSTRY MAINTENANCE

The energy industry maintenance encompasses sectors such as nuclear, eolian, thermal, cogeneration and solar. We have different solutions adapted to the different sectors, such as cleaning of heat interchanger plates and heads in the nuclear sector.

For the Cogeneration Industry, we decarbonise and degrease engines and clean heat interchangers.

In the Eolian Industry, ultrasounds are used to maintain gear motors.

FOOD INDUSTRY CLEANING

Our ultrasonic food industry cleaning  is ideal to remove oil, greasy dirt, waste and calcareous encrustation.

With the recommended ultrasound system, we achieve a better cleaning result compared to traditional methods

This constitutes a guarantee for the maintenance of equipment and instruments in an industry with such high hygienic requirements.

PHARMACEUTICAL AND LABORATORY INDUSTRY

TierraTech pharmaceutical manufacturing equipment.Our ultrasound equipment is used to remove traces of chemical products, oils, pigments or prints, among other residues.

We remove dirt from complex pieces with cracks, hard accesses or joints without damaging them. Ultrasound equipment achieves a superior cleanliness and saves time and effort compared to manual washing.

SHIP MAINTENANCE

Ship maintenance finds in our ultrasonic cleaning equipment the most suitable option. The Motor Clean range has large capacity equipment, ideal to clean large parts.

The marine sector finds in our ultrasonic cleaning equipment the most suitable option for the maintenance and repair of all types of engines. This is so because ultrasonic cleaning facilitates the cleaning of parts such as heat interchangers, cylinder heads, turbochargers, intercoolers, tube bundles, coolers or propellers and other large and heavy parts; thereby reducing the time and effort involved in the traditional systems.

ULTRASONIC PARTS WASHING

Ultrasonic cleaning is the most effective solution for parts washing, as well as for industrial bar tuning and piece machining.

It is an excellent solution to clean and remove residue such as shavings, remnants of grease, rust, etc.

Our systems are being implemented in all machining sub-sectors and bar tuning in the ancillary automotive industries, including connections, couplings, implants/medical prosthesis…

INDUSTRIAL MAINTENANCE CLEANING

 Ultrasonic equipment in industrial maintenance cleaning performs an essential task for the entire manufacturing process.

The harsh working conditions of this type of machinery makes preventive maintenance essential to extend their useful life and ensure smooth operation.

Our ultrasonic cleaning equipment facilitates cleaning chains, gears, electro-valves, transmissions or hydraulic gears, heat interchangers, filters, etc. contributing to a correct maintenance that favours efficient operation of the machinery and reduces the possibility of unexpected breakdowns.