Metrology Systems

Laboratory Roundness Tester

MODEL: R250

R250 roundness tester was conceived from the need to characterise pieces with circular and even complex geometries with utmost accuracy, and it is the ideal instrument to satisfy multiple measurement needs in the mechanical, motor, aerospace and machine manufacturing industries.

Bigger Models: R300,R500

ANALYSE PARAMETERS:

Roundness, linearity, cylindricity, conicity, cone shape, concentricity, parallelism, coaxiality, run out, total run out, thickness variation

Axis of C plate

  • Plate diameter: 250mm
  • Max load: 500N
  • Max Measured dia:500mm
  • Centering & leveling: ± 3mm — ± 2°

Axis of Z column

  • Transverse length: 300mm
  • Measurement speed:
  • 0.5-1-2mm/s
  • Positioning speed:0-15mm/s
  •  Linearity Error on 400mm :0.8 micron

Axis of R arm

  • Transverse length: 300mm
  • Motorised positioning:Internal/external
  • 20-150mN
  • Positioning speed:0-15mm/s

Pick-Up

  • Transverse length: 300mm
  • Motorized positioning:Internal/external20-150mN
  • Positioning speed:0-15mm/s

Roughness Testers

  • odel: LITEsurf
  • LITEsurf roughness tester is the basic tester of the range. This instrument is ideal to measure
    pieces directly on work stations or production machinery.
  • Measurement Range: 250 um (+ 50 um -200 um)
  • Resoultion:0.001μm
  • Cut off length: 0,25 – 0,8 – 2,5 mm
  • Cut off number: Selectable from 1 to 5
  • Transverse length: Up to 17,5 mm
  • Pickup: Optical, it can be rotated of 90° lateral
  • Measurement Parameters: (81) roughness parameters
  • Unit of measurement: mm & inch

Model: RT 10allows interchanging the pick-up, thus being able to take measurements on all types of surfaces, by simply mounting the most suitable pick-up.
  • Measurement Range: +/- 200 um Resoultion:0.001μm
  • Cut off length: 0,25 – 0,8 – 2,5 mm
  • Cut off number: Selectable from 1 to 5
  • Transverse length: Up to 16 mm
  • Pickup: Optical, it can be rotated of 90° lateral
  • Measurement Parameters: (11) Ra, Rq, Rt, Rz, Rc, RSm, Rmr, Rmax, RPc,Pt, R, AR, Rx)
  • Unit of measurement: mm & inch

Model: WARPsurf- Roughness & Profile

The WARPsurf is a single portable instrument the capability to perform both roughness and profilometry analysis.
  • Measurement Range: +/- 1500 um Resoultion:0.0001μm (0.1nm)
  •  Cut off length:0.08, 0,25 – 0,8 – 2,5 -8mm
  • Cut off number: Selectable from 1 to 20
  • Transverse length: Up to 60 mm
  • Pickup: Optical, it can be rotated of 90° lateral (interchangeable stylus)
  • Measurement Parameters: (81)

Ra, Rq, Rt, Rz, Rp, Rv, Rc, Rsk, Rku, RSm, RΔq, RΔa, Rmax, Rδc, Rmr, Rmr(c), RPc, RLo, Rlr, Rzjis, RHSC, R3z, hp, Ep ,Pa, Pq, Pt, Pq, Pv, Pc, Psk, Pku, PSm, PΔq, Pδc, PPc, PLo, Plr, PHSC ,Wa, Wq, Wt, Wz, Wp, Wv, Wc, Wsk, Wku, WSm, WΔq, Wδc, WPc, WLo, Wlr, WHSC,Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Rpk*, Rvk*, WDSm, WDc, WDt

R, AR, Rx, W, Aw, Wx, Wte, Rke, Rpke, Rvke, Mr1e, Mr2e, A1e, A2

ALL IN ONE PROFILOMETER

  • Measurement Range in X:    220mm
  • Measurement Range in Z:    50mm
  • Resolution on X axis:         0.5 micron
  • Resolution on Z axis:         0.1 micron
  • Transverse length: 320mm or 520mm Manual or Motorized CNC

 

  • Measurement speed:    0.2,0.5,1-2mm/s
  • Positioning speed:        0-10mm/s
  • Measurement tip :         Tip radius 20 μm
  • CNC cycles: Automatic measurement & positioning cycles with self comparison

Looking for a First-Class Instrumentation Solutions ?