Hardness Tester

AUTOMATIC- MICRO VICKERS, KNOOP, BRINELL

DURASCAN G5 SERIES-0.25 gf  to 62.5 kgf

The pioneering standard load range of the DuraScan G5 from 10 gf to 62.5 kgf expands the application range of the hardness tester enormously. This can be extended optionally to the range from 0.25 gf to 62.5 kgf – even subsequently at any time! The force is thereby continuously and precisely monitored electronically using a series of electronic force measuring sensors.

MODELS:

Universal Hardness Tester

universal

MODEL: DURAVISION G5

DuraVision G5 hardness tester is also particularly suitable for use in harsh, demanding production environments and cover a unique wide standard load range of 0.3–250 kgf and 3–3000 kgf. The Brinell, Vickers, and Rockwell test methods can be measured in compliance with EN ISO and ASTM standards

AUTOMATIC- ROCKWELL HARDNESS TESTER

DURAJET G5-1kgf to 250 kgf –NEW BENCHMARK TESTER

Complete Rockwell range is covered with just one device. Furthermore, tests on plastics and carbon as well as Vickers and Brinell tests can be performed in depth.

Test methods:

Rockwell- EN ISO 6508, ASTM E-18,Plastic testing– EN ISO 2039,HVD, HBD– depth measurement (non-standard), Carbon testing according to DIN 51917

  • Force via Closed loop control
  • Test anvil with device adapter
  • C adapter
  • Integreted LED lighting
  • Touchscreen with USB interface
  • Nose Cone extension
  • Automatic test cycles
  • Jominy Module
  • Large test anvil

GEAR TOOTH FLANK HARDNESS TESTER

MODEL: N7F

The tester is positioned on the tooth flanks and is clamped on the designated test point. After the clamping the application of the test load follows by means of a hand lever. Subsequently the result of the measurement is taken from the dial gauge in HRC values.

  • Load Range: 62.5kgf
  • Display: Analogue
  • External teeth module 2-10 max
  • Tooth measuring range: 140 mm

MODEL: N7P

Portable gear tooth flank tester and hardness value is indicated on an analogue dial gauge.  

  • Load Range: 62.5kgf
  • Display: Analogue
  • External teeth module: 3-35  max
  • Tooth measuring range: 700 mm

INTEST (BORE) HARDNESS TESTER

MODEL: N6

Our portable Rockwell hardness testers are the result of more than 60 years’ experience. The heart of every tester is the reliable spring sleeve unit for load application. The hardness value is indicated on an analogue dial gauge.  

Load Range: 62.5kgf
Display: Analogue
External teeth module 2-10 max
Tooth measuring range: 140 mm

Drilling:

The testing machine is positioned in the drilling and fixed by clamping action. The test load is applied via hand lever. Subsequently the reading is taken from the dial gauge in HRC values.

FOERSTER –UCI & LEEB HARDNESS

SonoDur 3- All in one Portable Hardness Tester

The non-destructive UCI test method (Ultrasonic Contact Impedance) as well as the Leeb test method enable fast and mobile measurement as a supplement to the classical hardness test. SONO series, the devices can also be used in difficult test positions and with complex component geometries in incoming goods inspection, mix-up testing, production control, quality assurance, weld seam testing, cut edge testing, maintenance according to DIN 50159 and ASTM A1038.

Applications:

surface hardness ,weld seam testing, cast iron,cast aluminium, induction heating,case hardening,tools,plasma nitriding,forged componens,Complex components, Incoming material inspections, production control, Quality assurance, thermally cut edges etc

Test Loads:

Handheld Probes: 10N (1 kgf), 30N (3kgf), 49N (5kgf), 98N (10kgf)

Motor Probe:         1N (0.1 kgf), 3N (0.3kgf) and 8.6 N (0.9 kgf)

Range:

 Vickers:  HV 10 – 1999 (9999), Brinell HB 76 – 618, Rockwell HRA 60,7 – 85,6,Rockwell HRB 41 – 105,Rockwell HRC 20,3 – 68, Rockwell HRE 70 – 108,5, Rockwell HR45N 19,9 – 75,4

Load Range: 62.5kgf
Display: Analogue
External teeth module 2-10 max
Tooth measuring range: 140 mm

Macro IRHD system

MACRO IRHD SYSTEM provides hardness readings on elastomers and plastics with a specimen thicker than 6 mm according to IRHD and Durometer hardness. It complies to international standards DIN ISO 48, ISO 48, ASTM D 1415 and DIN 53505.  The patented IRHD N, H, L Durometer Hardness System is working fully automatically with a PC and the Hildebrand Software.

Available inserts for IRHD ( N,H,L):

  • Ball 2,5 mm (IRHD N)     Material Thickness 8-10 mm     Range: 30-85 IRHD N
  • Ball 5,0 mm (IRHD L)     Material Thickness 10-15 mm    Range: 10-35 IRHD L
  • Ball 1,0 mm (IRHD H)     Material Thickness 8-10 mm      Range: 85-100 IRHD H
  • Insert Durometer A

   Accessories:

  • X table
  • Prism Centre Device
  • Macro IRHD test Blocks

Analogue Durometer HD3000

The gauge features a full-sized non-reflective dial face for readability accuracy of 1/2 point. The durometer conforms to DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240. Model HD3000 offers maximum accuracy.

Available types:  A, D, C, B, AO, DO, O, OO

Features:

  • Range: 0…100
  • Accuracy: ±0,5
  • Resolution: 1
  • Large Dial surface
  • Full 360 deg dial
  • Drag pointer availble

Accessories:

Digital Durometer HDD- 2

Hildebrand Digital Durometer Model HDD-2 is our latest innovation for checking the hardness of rubber, plastics and other non-metallic surfaces. The durometer conforms to DIN ISO 7619, ISO 868, ISO 7619 and ASTM D 2240.

Available types: A, D, C, B, DO, O, OO

Features:

  • Range: 0,5…100
  • Accuracy: ±0,5
  • Resolution: 0,1
  • Holds maximum reading
  • Data port: Opto RS 232

Accessories:

Test Block for Micro & Macro IRHD system

Rubber Test Blocks according to MICRO & MACRO  IRHD ISO 48.

  • Micro IRHD: 40,50,60,70,80,90
  • Macro IRHD: 30,40,50,60,70,80,90

Test Block for Durometer A: 7 pcs

The test kit consists of 7 Test blocks 48 mm x 48 mm x 8 mm. The hardness values are ranging from 30 durometer to 90

Test Block for Durometer D: 3 pcs

Three test blocks with hardness values of approx. 60, 75 and 85.

  • One Test Block approx. DIA. 50 mm x 9.5 mm

Test Block for Durometer D: 5 pcs

Five test blocks with hardness values of approx. 10, 20, 40, 65 and 90

  • Size for Test Blocks 10, 20 and 40 Type D: 48 mm x 48 mm x 8 mm
  • Size for Test Blocks 65 and 90 Typr D:   DIA. 50 mm x 9.5 mm

 

Test Block for Durometer OO : 3 pcs

Three test blocks with hardness values of approx. 35, 60 and 80 Type OO.

  • One Test Block approx. 50 mm x 50 mm x 8 mm

 

The Rubber Test Blocks are provided with a Calibration Certificate issued by Hildebrand Prüf- und Messtechnik GmbH.

Looking for a First-Class Instrumentation Solutions ?