Abrasive Cut-off Wheels
ferrous metals we have a range of metal cut-off wheels that provide outstanding sectioning results. Our metal cut-off blades for ferrous usage are all based on Al2O3 – the most efficient abrasive for these materials.
Ferrous Metals |
|
|
Aka-Cut Fe40
|
ferrous metal cutting with a hardness of 150-700 HV and only available as precision cut-off wheel. |
|
Aka-Cut Fe50
|
ferrous metals and steels with an approximate hardness of 50 HRC or in the range of 350-700 HV. |
|
Aka-Cut Fe60
|
ferrous metals and steels with an approximate hardness of 60 HRC or in the range of 500-1000 HV. |
| Aka-Cut 500 HV | ferrous metals with a hardness of approximately 250-500 HV |
Titanium |
|
|
Aka-Cut Ti20
|
titanium and titanium alloys with a hardness of 100 – 350 HV (20 HRC). |
Non Ferrous Metals |
|
|
Aka-Cut NF10
|
non-ferrous metals with a hardness of 50 – 250 HV (10 HRC). |
Precision Cut-Off Wheels
Our precision cut-off wheels are optimised for high precision cutting of different materials. Thin cut-off wheels limit the thermal damage and mechanical deformation during cutting.
Ferrous Metals
|
|
|
Aka-Cut 700HV (150mm)
|
precision cutting of soft and hard steels with a hardness of 150-700 HV (40 HRC). |
|
Aka-Cut 1000HV(150mm)
|
precision cutting of very hard steels with a hardness of 500-1000 HV (60 HRC). |
Non Ferrous Metals
|
|
| Aka-Cut 400 HV (150mm) | precision cutting of non-ferrous metals with a hardness of 50 – 400 HV (10 HRC). |
Coolant for Metal Cutting
The correct cutting cooling fluid is essential for a good sectioning result.
|
Aka-Cool |
Water-soluble cooling fluid for recirculation units. optimal performance mix 3-5 % of Aka-Cool with water. |
 Aka-NoFoam |
Anti-foaming agent for recirculation cooling unit. Mix 0.5-1.0 % of Aka-NoFoam with water. |
